Old wiring rarely announces itself. It hides behind the walls doing its job for decades, right up until breakers start tripping, outlets run warm, or an inspector flags it during a sale. When a home's electrical system has aged past the point of patching, rewiring the whole house is what brings it back to safe, modern, reliable service. Revival Electric handles whole-home rewiring for properties across Hellertown and the Lehigh Valley, replacing tired wiring, panels, and devices with a system built for the way families actually use power today.
A Hellertown, Pennsylvania company with roots three generations deep, Revival Electric serves Bethlehem, Allentown, Easton, and the surrounding Lehigh Valley. The company specializes in whole-home rewiring, replacing outdated branch wiring, worn devices, and undersized panels with modern copper wiring, grounded circuits, and properly sized service throughout the house. Owner Michael Cantilina brings 23 years of field experience to every project, and the team works to OSHA safety standards while wiring each home to current electrical code, from the panel to the last outlet.
A home built decades ago was wired for a fraction of the load a modern household places on it. Back then there were no microwaves, no banks of chargers, no space heaters and window units running at once. Today those same circuits get pushed hard, and the house starts telling you about it: breakers that trip for no clear reason, outlets that feel warm, lights that dim when the dryer kicks on, two-prong receptacles with no ground, and that faint burning smell nobody can quite place.
Underneath those symptoms is wiring that has reached the end of its service life. Insulation grows brittle and cracks, connections loosen and corrode, undersized conductors run hotter than they should under heavy load, and an old panel without enough capacity or grounding cannot keep up. Add a few generations of well-meaning but unpermitted modifications, and you have a system that is unsafe to keep stressing.
Whole-home rewiring replaces that aging system with one built for the present. We begin by assessing the existing wiring, panel, and load to map what the house needs, then plan the new circuits and routes before opening any walls. The crew runs fresh copper wiring to every circuit, installs grounded outlets and modern devices, upgrades the panel and service where needed, and keeps wall and finish disruption as limited as the job allows. Everything is permitted, inspected, and wired to current code, and we walk you through the plan and timeline before work begins.
When the rewire is finished, the house runs the way it should. Breakers hold, outlets stay cool, grounded circuits protect your devices and your family, and the system carries today's load with room to spare. You gain a home that is safer, easier to insure and sell, and ready for whatever you plug into it, without the worry that came with the old wiring.
Rewiring an entire house is a significant project, and the return shows up in safety, function, and peace of mind every day after. Here is what it delivers.
Fresh wiring, grounded circuits, and a modern panel remove the fire and shock hazards that come with brittle insulation and worn connections. The single biggest reason homeowners rewire is to stop worrying about what the old system might do.
Today's homes run far more than the circuits of decades past were meant to handle. A rewire gives you the dedicated circuits and capacity for appliances, electronics, and chargers, so the lights stop dimming and the breakers stop tripping.
Insurers and buyers both scrutinize old wiring, and outdated systems can stall a sale or raise premiums. Updated, permitted, code-compliant wiring removes that obstacle and adds real value to the property.
Many older homes still run ungrounded two-prong receptacles that put your electronics at risk. We replace them with grounded outlets across the house, including the GFCI protection required in kitchens, baths, and other wet areas.
Every whole-home rewiring project carries a one-year workmanship warranty. If anything tied to our work needs attention within that window, we return and make it right.
A full rewire is one path among several, and the right one depends on what your home is wired with now. These related Revival Electric services connect directly to this one.
If your home still runs early-century wiring, our Knob-and-Tube Wiring Replacement service removes that ungrounded system and replaces it with safe, modern, insurable circuits.
Homes wired in the 1960s and 70s often have aluminum branch wiring with known hazards. Our Aluminum Wiring Replacement service addresses those connections and replaces the wiring with copper.
To see the full range of options, the Electrical Rewiring hub gathers whole-home, knob-and-tube, and aluminum work in one place so you can find the fit for your house.
A whole-home rewire means trusting a crew inside your walls for days, so who does the work matters as much as the work itself. Here is what sets Revival Electric apart.
Michael Cantilina carries 23 years of experience and a trade handed down through three generations. A rewire involves countless small judgment calls, and that depth is what keeps the work clean, safe, and built to last.
Rewiring an occupied home demands careful work around live systems and your family's daily routine. Revival Electric follows OSHA safety standards throughout, protecting your household and the crew from start to finish.
You get a clear picture of what the home actually needs, room by room, with no padding. Free estimates let you understand the full scope and cost before committing to a project of this size.
Looking out for neighbors is built into how Revival Electric runs, from the Home Initiative that gives a nominated local family a free electrical job each month to the careful work that goes into servicing every customer's equipment.
A whole-home rewire is an investment, and financing keeps it within reach. You will know the full scope and price up front, with nothing appearing on the bill later.
Frequent breaker trips, warm or discolored outlets, dimming lights, two-prong ungrounded receptacles, and a burning smell are all signs worth taking seriously. Many older homes in the Hellertown area also have wiring that predates modern demands. We assess your system and tell you honestly whether a full rewire or a smaller fix is the right call.
Not always. Many Lehigh Valley homeowners stay in the house while we work room by room, though larger or faster projects can go more smoothly with the home empty. We plan the sequence around your routine and discuss the options during the estimate.
It depends on the size of the home and how accessible the wiring is, but most projects run several days to a couple of weeks. You will get a clear timeline before we start, along with updates as the work moves along.
Some access is unavoidable, but we keep openings as limited and tidy as the job allows and route wiring through the least disruptive path. We will explain what to expect for your specific home before any walls are opened.
Yes. Whole-home rewiring requires permits and inspection throughout the Lehigh Valley. Revival Electric handles the permitting and schedules the inspection so your updated system is documented and code-compliant.
FAQs reviewed by Michael Cantilina, owner of Revival Electric and a licensed, certified electrician.
You should not have to wonder whether the wiring behind your walls is safe. Revival Electric will assess your system and rewire your Hellertown home with modern, code-compliant circuits built for the way you live. Reach out today for a free estimate.
Business Name: Revival Electric
Address: Hellertown, PA, 18055
Phone: 610-222-5907
Business Hours:
Mon - Fri: 7:00 AM to 5:00 PM
Sat-Sun: Closed
Financing Available
One-year Warranty
Sign up for our monthly newsletter to receive deals/offers.
