If your home was built or updated between the mid-1960s and late 1970s, there is a real chance aluminum branch wiring runs through its walls. It was common then and is known now for connections that loosen, overheat, and create a fire risk over time. Revival Electric replaces aluminum wiring for homeowners across Hellertown and the Lehigh Valley, addressing the hazardous connections and installing copper wiring that holds up safely for the long term.
Homeowners with aluminum-era wiring across the Lehigh Valley turn to Revival Electric, a third-generation electrical contractor headquartered in Hellertown, Pennsylvania, and serving Allentown, Bethlehem, and Easton. The company provides aluminum wiring replacement for homes built during the era when aluminum branch wiring was common, covering inspection of existing connections, replacement of aluminum circuits with copper, panel and device upgrades, and code-compliant remediation. Owner Michael Cantilina, a licensed electrician with 23 years of experience, leads a team that works to OSHA safety standards while removing one of the more overlooked fire hazards in older homes.
During the 1960s and 70s, when copper prices spiked, many homes were wired with aluminum branch circuits. Decades later, those homes are showing the consequences: flickering lights, warm outlet and switch covers, the occasional acrid smell near a receptacle, and connections that quietly degrade behind cover plates. The trouble is that aluminum wiring often gives little warning before a connection becomes dangerous.
Aluminum behaves differently from copper in ways that matter at every connection. It expands and contracts more with heat, which gradually loosens terminations, and it oxidizes, forming a resistant layer that makes connections run hotter. Pair aluminum with devices and splices designed for copper, as much of that era's work did, and you get connection points that heat up over time and can eventually arc or ignite nearby material.
Replacing aluminum wiring removes that risk at the source. We begin by inspecting the home to confirm where aluminum runs and to assess the condition of the connections, then plan the replacement. The crew replaces the aluminum branch circuits with copper wiring, updates devices and the panel as needed, and makes every connection with copper-rated materials to current code. Where a proper connection-repair method genuinely fits the situation, we will tell you honestly rather than push a full rewire. Permits and inspection are part of the job.
Once the aluminum is replaced with copper, the connections that used to loosen and overheat are gone, and so is the fire risk that came with them. The home runs on wiring that stays cool and stable under load, your insurer's concerns are resolved, and you no longer have to wonder what is happening behind the outlet covers. The result is a safer home with wiring that performs the way it should.
Replacing aluminum branch wiring removes a hazard that often hides until it becomes serious. Here is what the upgrade gives you.
The overheating connections that make aluminum wiring dangerous disappear once the circuits are replaced with copper. Removing that risk is the main reason homeowners take on the project, and it is a meaningful one.
Copper holds its connections far better than aluminum, which expands, contracts, and oxidizes over time. The new wiring stays tight and cool under load, putting an end to the slow degradation behind your devices.
Like knob-and-tube, aluminum wiring raises flags for insurance companies. Replacing it with copper resolves those concerns and can make coverage easier to obtain and keep.
Aluminum-era homes often pair old wiring with worn outlets, switches, and panels. We update those components as part of the work, so the whole system is brought to a modern, code-compliant standard.
Every aluminum wiring replacement carries a one-year workmanship warranty. If anything connected to our work needs attention within that window, we return and take care of it.
Aluminum replacement is one part of the company's rewiring work, and the right service depends on what your home is wired with. These related Revival Electric services tie in directly.
When aluminum wiring is widespread or paired with other failing systems, our Whole-Home Rewiring service replaces everything with modern copper circuits in one coordinated project.
Older homes sometimes contain more than one outdated wiring type. Our Knob-and-Tube Wiring Replacement service removes century-old ungrounded wiring and installs safe, modern circuits.
To compare every option in one place, the Electrical Rewiring hub gathers whole-home, knob-and-tube, and aluminum work so you can choose what fits your house.
Aluminum wiring demands an electrician who knows exactly how it fails and how to correct it safely. Here is what brings Lehigh Valley homeowners to Revival Electric for this work.
As a third-generation electrician with 23 years of experience, Michael Cantilina understands the quirks of aluminum wiring and the connection methods that make a replacement safe and durable.
Working with degraded aluminum connections calls for care, and the team follows OSHA safety standards on every job. That protects your home and the crew while the hazard is being removed.
Sometimes full replacement is the answer, and sometimes a proper connection repair fits the situation. You get an honest recommendation based on what your home actually needs, backed by a free estimate.
Through its Home Initiative, Revival Electric completes a free electrical job each month for a nominated local family. The company treats its customers with that same neighborly care.
Replacing aluminum wiring is a meaningful project, and financing helps make it manageable. You will know the full scope and cost up front, with nothing added after the fact.
Homes built or rewired between roughly 1965 and 1979 are the most likely candidates, and the wiring is sometimes marked AL or aluminum on the cable jacket, often visible at the panel. If you are not sure, we can inspect your Hellertown-area home and confirm whether aluminum branch wiring is present.
Not every aluminum-wired home has an active problem, but the connections carry a higher risk of overheating over time, which is why it draws concern. We assess the condition of your wiring and connections and give you a straight answer about the level of risk and the right response.
In some cases, an approved connection-repair method is appropriate and can address the risk without a full rewire. In others, replacing the aluminum with copper is the better long-term solution. We will explain which approach fits your home and why during the estimate.
It often does. Many insurers across the Lehigh Valley view aluminum branch wiring as a higher risk, so replacing it with copper, or properly remediating the connections, can ease coverage concerns. We can document the completed, permitted work for your insurer.
Yes. This work requires permits and inspection throughout the Lehigh Valley. Revival Electric handles the permitting and schedules the inspection so your updated wiring is documented and code-compliant.
FAQs reviewed by Michael Cantilina, owner of Revival Electric and a licensed, certified electrician.
Aluminum wiring tends to stay quiet until a connection fails, and that is not a risk worth keeping. Revival Electric will inspect your home and replace aluminum branch wiring with safe copper across Hellertown and the Lehigh Valley. Contact us today for a free estimate.
Business Name: Revival Electric
Address: Hellertown, PA, 18055
Phone: 610-222-5907
Business Hours:
Mon - Fri: 7:00 AM to 5:00 PM
Sat-Sun: Closed
Financing Available
One-year Warranty
Sign up for our monthly newsletter to receive deals/offers.
