When a project needs power in a place the main panel cannot easily reach, a subpanel is usually the answer. A detached garage, a finished basement, a backyard shop, a home addition, or a workshop full of tools all benefit from their own local distribution point rather than long runs of individual circuits back to a crowded main. Revival Electric installs subpanels for homeowners across Hellertown and the Lehigh Valley, extending capacity cleanly to wherever you need more circuits.
Run by a third generation of the same family, Revival Electric is based in Hellertown, Pennsylvania, and serves Allentown, Bethlehem, Easton, and the greater Lehigh Valley. The company provides subpanel installation for garages, additions, basements, workshops, and outbuildings, covering feeder sizing, the subpanel and breakers, proper grounding and bonding separation, and the dedicated circuits the new space requires. Owner Michael Cantilina, a licensed electrician with 23 years of experience, leads a team that works to OSHA safety standards while adding distribution where a property needs room to grow.
Plenty of projects stall at the same point: the main panel is too far away, too full, or both. You want to power a detached garage, wire a new addition, run a workshop, or finish a basement, but every new circuit would mean a long individual run back to a main panel that may not have the open slots to accept them. The result is an expensive tangle of home runs, or a project that cannot move forward at all.
The trouble is one of distribution and distance. A single main panel was meant to serve the original footprint of the house, not a new outbuilding or addition some distance away. Running many separate circuits over a long distance is inefficient and quickly exhausts the main panel's capacity for breakers. Without a local distribution point, there is no clean way to deliver the number of circuits a new space actually needs.
A subpanel solves that by acting as a local hub fed from the main panel. We calculate the load the new area will draw, size the feeder accordingly, and install the subpanel where the circuits are needed. The crew runs the correctly sized feeder from the main panel, sets the subpanel with proper grounding and the required separation of neutrals and grounds, and adds the dedicated circuits for the space. For a detached structure, that includes the right feeder and grounding electrode an outbuilding requires. Permits and inspection are part of every job.
With the subpanel in place, the new space has its own organized source of power and plenty of room for the circuits it needs. The main panel is no longer stretched across the property, the wiring is efficient and clean, and adding or adjusting circuits in that area becomes simple. Your garage, shop, basement, or addition finally has the electrical backbone the project called for.
A well-placed subpanel turns a difficult wiring problem into a simple one and sets a new space up for whatever it needs. Here is what it offers.
A subpanel puts a distribution point in the garage, shop, basement, or addition itself, so circuits originate close to where they are used instead of running the length of the property from the main panel.
Rather than cramming more breakers into a full main panel, a subpanel takes a single feeder and branches out from there. That frees the main panel and keeps the whole system organized.
Workshops, EV chargers, and appliances often need their own dedicated circuits. A subpanel gives the new space the slots to support them without competing with the rest of the house.
For a detached garage or an addition, a properly sized feeder to a subpanel is far cleaner than many long individual runs. We handle the feeder, grounding, and bonding separation an outbuilding requires.
Every subpanel installation carries a one-year workmanship warranty. If anything connected to our work needs attention within that window, we return and take care of it.
A subpanel is one part of the company's broader panel work, and the right service depends on what your property needs. These related Revival Electric services connect to this one.
If adding a subpanel would push your home past its incoming capacity, our Electrical Service Upgrades service raises the service so there is power to distribute.
When the main panel itself is old or unsafe, our Breaker Panel Replacement service replaces the load center so your subpanel feeds from a sound source.
To compare every option together, the Electrical Panel Upgrades hub brings service upgrades, panel replacement, and subpanels into one place so you can choose what suits the project.
A subpanel done right depends on correct feeder sizing and grounding details that are easy to get wrong, so the electrician matters. Here is what you get with Revival Electric.
With 23 years of experience and a third-generation background, Michael Cantilina sizes feeders and subpanels to the real load and gets the grounding and bonding separation correct, the details that make a subpanel safe.
Tying a subpanel into the main panel means working with live distribution. The team follows OSHA safety standards on every job, keeping your property and the crew protected.
Whether the subpanel serves a shop, an addition, or a detached garage, we plan it around what you are building and how you will use the space. Free estimates let you see the approach and cost first.
Revival Electric runs its Home Initiative year-round, completing one free electrical job a month for a nominated local family. The attention behind that effort is exactly what the team brings to maintaining each customer's equipment.
A subpanel is often part of a larger build, and financing helps keep the electrical portion manageable. You will know the full scope and price up front, with nothing added after.
A subpanel makes sense when the main panel is full, when the new circuits are far from it, or when you are powering a separate space like a garage or addition. For many Hellertown-area projects, a single feeder to a subpanel is cleaner and more capable than running numerous long circuits back to the main.
Yes. We install subpanels in detached garages, shops, and other outbuildings throughout the Lehigh Valley, running the correctly sized feeder and handling the separate grounding an outbuilding requires. It is one of the more common reasons people ask us for a subpanel.
Often yes, but it depends on your main panel's available capacity and your home's existing load. We check both before installing, and if the main service is too tight to support the subpanel, we will tell you and discuss a service upgrade as an option.
That depends on the size of the subpanel and the feeder serving it. We size both to the load your new space needs, with some room to spare, so the subpanel comfortably handles its circuits without being maxed out from day one.
Yes. Subpanel installation requires a permit and inspection throughout the Lehigh Valley. Revival Electric handles the permitting and schedules the inspection so your new subpanel is documented and code-compliant.
FAQs reviewed by Michael Cantilina, owner of Revival Electric and a licensed, certified electrician.
A new space deserves its own clean source of power instead of a tangle of long circuits. Revival Electric will size and install a subpanel that serves your garage, shop, basement, or addition across Hellertown and the Lehigh Valley. Contact us today for a free estimate.
Business Name: Revival Electric
Address: Hellertown, PA, 18055
Phone: 610-222-5907
Business Hours:
Mon - Fri: 7:00 AM to 5:00 PM
Sat-Sun: Closed
Financing Available
One-year Warranty
Sign up for our monthly newsletter to receive deals/offers.
